Home » Memory Modules » Kingston 2GB DDR3 SoDimm 204Pin ValueRam

Saturday, 18 May 2013

Download Drivers
PLDT myDSL Ultra Broadband Blowout

Kingston 2GB DDR3 SoDimm 204Pin ValueRam

Kingston 2GB DDR3 SoDimm 204Pin ValueRam
Kingston

Kingston 2GB DDR3 SoDimm 204Pin ValueRam
Kingston ValueRAM 2GB DDR3 1333 System Memory, 204-pin SoDIMM, CL9, Non-ECC, Unbuffered. Model: KVR1333D3N9/2G.

Price:  P 999  

Features

Kingston ValueRAM's 256M x 64-bit 2GB (2048MB) DDR3-1333 CL9 SDRAM (Synchronous DRAM) memory module, based on eight 256M x 8-bit DDR3-1333 FBGA components. The SPD is programmed to JEDEC standard latency 1333Mhz timing of 9-9-9 at 1.5V. This 204-pin DIMM uses gold contact fingers and requires +1.5V.

  • JEDEC standard 1.5V ± 0.075V Power Supply
  • VDDQ = 1.5V ± 0.075V
  • 667MHz fCK for 1333Mb/sec/pin
  • 8 independent internal bank
  • Programmable CAS Latency: 5,6,7,8,9,10
  • Posted CAS
  • Programmable Additive Latency: 0, CL - 2, or CL - 1 clock
  • Programmable CAS Write Latency(CWL) = 9(DDR3-1333)
  • 8-bit pre-fetch
  • Burst Length: 8 (Interleave without any limit, sequential with starting address “000” only), 4 with tCCD = 4
  • which does not allow seamless read or write [either on the fly using A12 or MRS]
  • Bi-directional Differential Data Strobe
  • Internal(self) calibration : Internal self calibration through ZQ pin (RZQ : 240 ohm ± 1%)
  • On Die Termination using ODT pin
  • Average Refresh Period 7.8us at lower then TCASE 85°C, 3.9us at 85°C < TCASE . 95°C
  • Asynchronous Reset
  • 1066Mbps CL7 doesn’t have backward compatibility with 800Mbps CL5
  • PCB : Height 1.180” (30.00mm), double sided component

Technical Specifications

Model KVR1333D3N9/2G.
Type204-Pin DDR3 SoDIMM.
Capacity2GB.
SpeedDDR3 1333MHz.
Cache LatencyCL9.
Voltage1.5V.
Error CheckingNon-ECC.
DIMM TypeUnbuffered.
Module Configuration256MHz X 64.
WarrantyLifetime.